HMSBAR 971: Crane Barge with 8pt mooring system for sale
Direct from European owners, please see this very capable floating crane barge for sale, with 245 t capacity deck crane & 8 point mooring system. The barge is also fully equipped for near shore piling activities, and has a bespoke pile leader for installing raked piles.
During Special Survey in 2016, the vessel had over 2 million Euro of steel replaced in addition to other substantial overhauling and maintenance. Intermediate survey was completed in early July 2019 & next Special Survey is not due until April 2021.
In summary, a highly versatile, well equipped & maintained floating crane barge, ideal for piling work or any other marine construction projects.
Available now, in the Caribbean, as is where is.
- Useful 60 x 23 m dimensions, allowing plenty of deck storage & good crane stability
- 245 t capacity Manitowoc ringer crane
- 9 x 50 t brake mooring winches
- 2 x spud legs (winch & crane powered) for additional positioning options
- Generators – 1 x 85 kVA & 1 x 25 kVA
Make : Manitowoc
Type : 36’ Platform Ringer
Max lift capacity main hoist : 245 T
Max lift capacity with yoke frame : 236 (2 x 118) T
Lift capacity whip line : 15 T
Lift capacity jib hoist : 25.60 T
Maximum capacity auxiliary hoist : 12.8 T
Total counterweight : 250 T
Available boom lengths
140 ft / 42.67 m
180 ft /54.86 m
200 ft/ 60.96 m
Bespoke pile leader for raked piles
HMSBAR 971 can maintain position either by using her exceptionally long spuds, or using the high spec 8pt mooring system, or both together.
SPUDS: Fwd – 1 x 31.7 m (dia 1.22 m) controlled by the 9th winch in the mooring system & 1 x 32.5 m (dia 0.91m), which can be utilised in either of the two spud leads located port & stbd aft. This spud is controlled by the ringer crane.
MOORING SYSTEM: 9 x diesel/hydraulic winches remotely controlled from central control room with clear view over winches & working deck.
Anchor winch 9
Pulling force 2 x 25 mT
Holding force 6 x 50 mT
Drum capacity 6 x 500 and 3 x 350 m
Wire diameter 36 mm
Type Delta Flipper
Weight 2 x 2.5 and 4 x 3 mT
Canteen with kitchen facilities
Command bridge with mooring control, compass and radio equipment
2 x storage workshop rooms below deck
Generator room with 1 x 85 kVA and 1 x 25 kVA generators
|Dimensions (LOA x B x D):||60.0 x 23.0 x 3.8|
Additional Specs for this Vessel Type
|Deck Strength (t/ m2):||7.50|
|Mooring System:||Pulling force 2 x 25 mT, Holding force 6 x 50 mT, 6 x 500 m wires (36 mm)|
|Spud Leg Length (m):||Fwd - 1 x 31.7 m (dia 1.22 m), Aft- 1 x 32.5 m (dia 0.91 m)|
|Crane:||Manitowoc 36’ Platform Ringer|
|Other:||Fuel/Fresh water/sewage tanks|